final def !=(arg0: Any): Boolean

Definition Classes: AnyRef → Any

final def ##(): Int

Definition Classes: AnyRef → Any

def ++[U >: T](other: Observable[U]): Observable[U]

Returns an Observable that first emits the items emitted by this, and then the items emitted by other.

other: an Observable to be appended
returns: an Observable that emits items that are the result of combining the items emitted by this and that, one after the other

Definition Classes: Observable

def +:[U >: T](elem: U): Observable[U]

Returns an Observable that emits a specified item before it begins to emit items emitted by the source Observable.

elem: the item to emit
returns: an Observable that emits the specified item before it begins to emit items emitted by the source Observable

Definition Classes: Observable

final def ==(arg0: Any): Boolean

Definition Classes: AnyRef → Any

def apply(onNext: (T) ⇒ Unit): Subscription

Call this method to receive items from this observable.

onNext: this function will be called whenever the Observable emits an item
returns: a subscription.Subscription reference whose unsubscribe method can be called to stop receiving items before the Observable has finished sending them

Definition Classes: Observable
See also: ReactiveX operators documentation: Subscribe

final def asInstanceOf[T0]: T0

Definition Classes: Any

def asObservable(): Observable[T]

Definition Classes: Subject

def audit[I](durationSelector: (T) ⇒ Observable[I]): Observable[T]

Ignores source values for a duration determined by another Observable, then emits the most recent value from the source Observable, then repeats this process.

It's like auditTime, but the silencing duration is determined by a second Observable.

audit is similar to throttle, but emits the last value from the silenced time window, instead of the first value. audit emits the most recent value from the source Observable on the output Observable as soon as its internal timer becomes disabled, and ignores source values while the timer is enabled. Initially, the timer is disabled. As soon as the first source value arrives, the timer is enabled by calling the durationSelector function with the source value, which returns the "duration" Observable. When the duration Observable emits a value or completes, the timer is disabled, then the most recent source value is emitted on the output Observable, and this process repeats for the next source value.

durationSelector: A function that receives a value from the source Observable, for computing the silencing duration, returned as an Observable or a Promise.
returns: {Observable[T]} An Observable that performs rate-limiting of emissions from the source Observable.

Definition Classes: Observable

def auditTime(delay: Int): Observable[T]

Ignores source values for duration milliseconds, then emits the most recent value from the source Observable, then repeats this process.

When it sees a source values, it ignores that plus the next ones for `duration` milliseconds, and then it emits the most recent value from the source.

auditTime is similar to throttleTime, but emits the last value from the silenced time window, instead of the first value. auditTime emits the most recent value from the source Observable on the output Observable as soon as its internal timer becomes disabled, and ignores source values while the timer is enabled. Initially, the timer is disabled. As soon as the first source value arrives, the timer is enabled. After duration milliseconds (or the time unit determined internally by the optional scheduler) has passed, the timer is disabled, then the most recent source value is emitted on the output Observable, and this process repeats for the next source value. Optionally takes a Scheduler for managing timers.

delay: Time to wait before emitting the most recent source value, measured in milliseconds or the time unit determined internally by the optional scheduler.
returns: An Observable that performs rate-limiting of emissions from the source Observable.

Definition Classes: Observable

def auditTime(delay: Int, scheduler: Scheduler): Observable[T]

Ignores source values for duration milliseconds, then emits the most recent value from the source Observable, then repeats this process.

When it sees a source values, it ignores that plus the next ones for `duration` milliseconds, and then it emits the most recent value from the source.

auditTime is similar to throttleTime, but emits the last value from the silenced time window, instead of the first value. auditTime emits the most recent value from the source Observable on the output Observable as soon as its internal timer becomes disabled, and ignores source values while the timer is enabled. Initially, the timer is disabled. As soon as the first source value arrives, the timer is enabled. After duration milliseconds (or the time unit determined internally by the optional scheduler) has passed, the timer is disabled, then the most recent source value is emitted on the output Observable, and this process repeats for the next source value. Optionally takes a Scheduler for managing timers.

delay: Time to wait before emitting the most recent source value, measured in milliseconds or the time unit determined internally by the optional scheduler.
scheduler: The Scheduler to use for managing the timers that handle the rate-limiting behavior.
returns: An Observable that performs rate-limiting of emissions from the source Observable.

Definition Classes: Observable

def buffer[T2](closingNotifier: Observable[T2]): Observable[List[T]]

Creates an Observable which produces buffers of collected values.

Buffers the incoming Observable values until the given closingNotifier Observable emits a value, at which point it emits the buffer on the output Observable and starts a new buffer internally, awaiting the next time closingNotifier emits.

closingNotifier: An Observable that signals the buffer to be emitted on the output Observable.
returns: An Observable of buffers, which are arrays of values.

Definition Classes: Observable

def bufferCount(count: Int): Observable[List[T]]

Creates an Observable which produces buffers of collected values.

This Observable produces connected non-overlapping buffers, each containing count elements. When the source Observable completes or encounters an error, the current buffer is emitted, and the event is propagated.

count: The maximum size of each buffer before it should be emitted.
returns: An rxscalajs.Observable which produces connected non-overlapping buffers containing at most count produced values.

Definition Classes: Observable

def bufferCount(count: Int, skip: Int): Observable[List[T]]

Creates an Observable which produces windows of collected values.

Creates an Observable which produces windows of collected values. This Observable produces windows every skip values, each containing count elements. When the source Observable completes or encounters an error, the current window is emitted and the event is propagated.

count: The maximum size of each window before it should be emitted.
skip: How many produced values need to be skipped before starting a new window. Note that when skip and count are equal that this is the same operation as window(int).
returns: An rxscalajs.Observable which produces windows every skip values containing at most bufferSize produced values.

Definition Classes: Observable

def bufferTime(bufferTimeSpan: FiniteDuration): Observable[List[T]]

Creates an Observable which produces buffers of collected values.

This Observable produces connected non-overlapping buffers, each of a fixed duration specified by the timespan argument. When the source Observable completes or encounters an error, the current buffer is emitted and the event is propagated.

bufferTimeSpan: The period of time each buffer is collecting values before it should be emitted, and replaced with a new buffer.
returns: An rxscalajs.Observable which produces connected non-overlapping buffers with a fixed duration.

Definition Classes: Observable

def bufferTime(bufferTimeSpan: Int, bufferCreationInterval: Int): Observable[List[T]]

Creates an Observable which produces buffers of collected values.

Creates an Observable which produces buffers of collected values. This Observable starts a new buffer periodically, which is determined by the timeshift argument. Each buffer is emitted after a fixed timespan specified by the timespan argument. When the source Observable completes or encounters an error, the current buffer is emitted and the event is propagated.

bufferTimeSpan: The period of time each buffer is collecting values before it should be emitted.
bufferCreationInterval: The period of time after which a new buffer will be created.
returns: An rxscalajs.Observable which produces new buffers periodically, and these are emitted after a fixed timespan has elapsed.

Definition Classes: Observable

def bufferTime(bufferTimeSpan: FiniteDuration, bufferCreationInterval: FiniteDuration): Observable[List[T]]

Creates an Observable which produces buffers of collected values.

Creates an Observable which produces buffers of collected values. This Observable starts a new buffer periodically, which is determined by the timeshift argument. Each buffer is emitted after a fixed timespan specified by the timespan argument. When the source Observable completes or encounters an error, the current buffer is emitted and the event is propagated.

bufferTimeSpan: The period of time each buffer is collecting values before it should be emitted.
bufferCreationInterval: The period of time after which a new buffer will be created.
returns: An rxscalajs.Observable which produces new buffers periodically, and these are emitted after a fixed timespan has elapsed.

Definition Classes: Observable

def bufferTime(bufferTimeSpan: FiniteDuration, bufferCreationInterval: FiniteDuration, scheduler: Scheduler): Observable[List[T]]

Creates an Observable which produces buffers of collected values.

Creates an Observable which produces buffers of collected values. This Observable starts a new buffer periodically, which is determined by the timeshift argument. Each buffer is emitted after a fixed timespan specified by the timespan argument. When the source Observable completes or encounters an error, the current buffer is emitted and the event is propagated.

bufferTimeSpan: The period of time each buffer is collecting values before it should be emitted.
bufferCreationInterval: The period of time after which a new buffer will be created.
scheduler: The rxscalajs.Scheduler to use when determining the end and start of a buffer.
returns: An rxscalajs.Observable which produces new buffers periodically, and these are emitted after a fixed timespan has elapsed.

Definition Classes: Observable

def bufferToggle[T2, O](openings: Observable[O])(closingSelector: (O) ⇒ Observable[T2]): Observable[List[T]]

Buffers the source Observable values starting from an emission from openings and ending when the output of closingSelector emits.

Collects values from the past as an array. Starts collecting only when `opening` emits, and calls the `closingSelector` function to get an Observable that tells when to close the buffer.

Buffers values from the source by opening the buffer via signals from an Observable provided to openings, and closing and sending the buffers when a Subscribable or Promise returned by the closingSelector function emits.

openings: An Observable or Promise of notifications to start new buffers.
closingSelector: A function that takes the value emitted by the openings observable and returns a Subscribable or Promise, which, when it emits, signals that the associated buffer should be emitted and cleared.
returns: An observable of arrays of buffered values.

Definition Classes: Observable

def bufferWhen[T2](closingSelector: () ⇒ Observable[T2]): Observable[List[T]]

Buffers the source Observable values, using a factory function of closing Observables to determine when to close, emit, and reset the buffer.

Collects values from the past as an array. When it starts collecting values, it calls a function that returns an Observable that tells when to close the buffer and restart collecting.

Opens a buffer immediately, then closes the buffer when the observable returned by calling closingSelector function emits a value. When it closes the buffer, it immediately opens a new buffer and repeats the process.

closingSelector: A function that takes no arguments and returns an Observable that signals buffer closure.
returns: An observable of arrays of buffered values.

Definition Classes: Observable

def catchError[U >: T](resumeFunction: (Any) ⇒ Observable[U]): Observable[U]

Continues an observable sequence that is terminated by an exception with the next observable sequence.

resumeFunction: Exception handler function that returns an observable sequence given the error that occurred in the first sequence
returns: An observable sequence containing the first sequence's elements, followed by the elements of the handler sequence in case an exception occurred.

Definition Classes: Observable

def clone(): AnyRef

Attributes: protected[java.lang]
Definition Classes: AnyRef
Annotations: @throws( ... )

def collect[B](partialProject: PartialFunction[T, B]): Observable[B]

Scala API Same as map, but with PartialFunction, where observable emits elements only for defined values

partialProject: Partial function that will be applied to elements for which it is defined
returns: An observable sequence containing the first sequence elements projected by partialProject for which it was defined.

Definition Classes: Observable

def combineAll[U, R](project: (Array[U]) ⇒ R)(implicit evidence: <:<[Observable[T], Observable[Observable[U]]]): Observable[R]

Converts a higher-order Observable into a first-order Observable by waiting for the outer Observable to complete, then applying combineLatest.

Flattens an Observable-of-Observables by applying `[[combineLatest]]` when the Observable-of-Observables completes.

Takes an Observable of Observables, and collects all Observables from it. Once the outer Observable completes, it subscribes to all collected Observables and combines their values using the combineLatest strategy, such that: - Every time an inner Observable emits, the output Observable emits. - When the returned observable emits, it emits all of the latest values by:

If a project function is provided, it is called with each recent value from each inner Observable in whatever order they arrived, and the result of the project function is what is emitted by the output Observable.
If there is no project function, an array of all of the most recent values is emitted by the output Observable.

project: An optional function to map the most recent values from each inner Observable into a new result. Takes each of the most recent values from each collected inner Observable as arguments, in order.
returns: {Observable} An Observable of projected results or arrays of recent values.

Definition Classes: Observable

def combineAll[U](implicit evidence: <:<[Observable[T], Observable[Observable[U]]]): Observable[Seq[U]]

Converts a higher-order Observable into a first-order Observable by waiting for the outer Observable to complete, then applying combineLatest.

Flattens an Observable-of-Observables by applying `[[combineLatest]]` when the Observable-of-Observables completes.

Takes an Observable of Observables, and collects all Observables from it. Once the outer Observable completes, it subscribes to all collected Observables and combines their values using the combineLatest strategy, such that: - Every time an inner Observable emits, the output Observable emits. - When the returned observable emits, it emits all of the latest values by:

If a project function is provided, it is called with each recent value from each inner Observable in whatever order they arrived, and the result of the project function is what is emitted by the output Observable.
If there is no project function, an array of all of the most recent values is emitted by the output Observable.

returns: {Observable} An Observable of projected results or arrays of recent values.

Definition Classes: Observable

def combineLatest[U, V, W](first: Observable[U], second: Observable[V], third: Observable[W]): Observable[(T, U, V, W)]

Combines four observables, emitting a tuple of the latest values of each of the source observables each time an event is received from one of the source observables.

first: an Observable to be combined
second: an Observable to be combined
third: an Observable to be combined
returns: An Observable that combines the source Observables

Definition Classes: Observable

def combineLatest[U, V](first: Observable[U], second: Observable[V]): Observable[(T, U, V)]

Combines four observables, emitting a tuple of the latest values of each of the source observables each time an event is received from one of the source observables.

first: an Observable to be combined
second: an Observable to be combined
returns: An Observable that combines the source Observables

Definition Classes: Observable

def combineLatest[U](that: Observable[U]): Observable[(T, U)]

Combines two observables, emitting a combination of the latest values of each of the source observables each time an event is received from one of the source observables.

that: The second source observable.
returns: An Observable that combines the source Observables

Definition Classes: Observable

def combineLatestWith[U, V, W, R](first: Observable[U], second: Observable[V], third: Observable[W])(selector: (T, U, V, W) ⇒ R): Observable[R]

Combines four observables, emitting some type R specified in the function selector, each time an event is received from one of the source observables, where the aggregation is defined by the given function.

first: an Observable to be combined
second: an Observable to be combined
third: an Observable to be combined
selector: The function that is used combine the emissions of the four observables.
returns: An Observable that combines the source Observables according to the function selector.

Definition Classes: Observable

def combineLatestWith[U, V, R](first: Observable[U], second: Observable[V])(selector: (T, U, V) ⇒ R): Observable[R]

Combines three observables, emitting some type R specified in the function selector, each time an event is received from one of the source observables, where the aggregation is defined by the given function.

first: an Observable to be combined
second: an Observable to be combined
selector: The function that is used combine the emissions of the three observables.
returns: An Observable that combines the source Observables according to the function selector.

Definition Classes: Observable

def combineLatestWith[U, R](that: Observable[U])(selector: (T, U) ⇒ R): Observable[R]

Combines two observables, emitting some type R specified in the function selector, each time an event is received from one of the source observables, where the aggregation is defined by the given function.

that: The second source observable.
selector: The function that is used combine the emissions of the two observables.
returns: An Observable that combines the source Observables according to the function selector.

Definition Classes: Observable

def complete(): Unit

Notifies the Observer that the rxscalajs.Observable has finished sending push-based notifications.

The rxscalajs.Observable will not call this method if it calls error.

Definition Classes: Subject → Observer

def concat[U >: T](other: Observable[U]): Observable[U]

Returns an Observable that first emits the items emitted by this, and then the items emitted by other.

other: an Observable to be appended
returns: an Observable that emits items that are the result of combining the items emitted by this and that, one after the other

Definition Classes: Observable

def concatAll[U](implicit evidence: <:<[Observable[T], Observable[Observable[U]]]): Observable[U]

Returns an Observable that emits the items emitted by several Observables, one after the other.

This operation is only available if this is of type Observable[Observable[U]] for some U, otherwise you'll get a compilation error.

Definition Classes: Observable

def concatMap[R](project: (T) ⇒ Observable[R]): Observable[R]

Returns a new Observable that emits items resulting from applying a function that you supply to each item emitted by the source Observable, where that function returns an Observable, and then emitting the items that result from concatinating those resulting Observables.

project: a function that, when applied to an item emitted by the source Observable, returns an Observable
returns: an Observable that emits the result of applying the transformation function to each item emitted by the source Observable and concatinating the Observables obtained from this transformation

Definition Classes: Observable

def concatMapTo[R](innerObservable: Observable[R]): Observable[R]

Projects each source value to the same Observable which is merged multiple times in a serialized fashion on the output Observable.

innerObservable: a function that, when applied to an item emitted by the source Observable, returns an Observable
returns: an Observable that emits the result of applying the transformation function to each item emitted by the source Observable and concatinating the Observables obtained from this transformation

Definition Classes: Observable

def count: Observable[Int]

Return an Observable which emits the number of elements in the source.

returns: an Observable which emits the number of elements in the source.

Definition Classes: Observable

def count(predicate: (T, Int, Observable[T]) ⇒ Boolean): Observable[Int]

Return an Observable which emits the number of elements in the source Observable which satisfy a predicate.

predicate: the predicate used to test elements.
returns: an Observable which emits the number of elements in the source Observable which satisfy a predicate.

Definition Classes: Observable

def debounce(debounceSelector: (T) ⇒ Observable[Int]): Observable[T]

Return an Observable that mirrors the source Observable, except that it drops items emitted by the source Observable that are followed by another item within a computed debounce duration.

debounceSelector: function to retrieve a sequence that indicates the throttle duration for each item
returns: an Observable that omits items emitted by the source Observable that are followed by another item within a computed debounce duration

Definition Classes: Observable

def debounceTime(timeout: Int): Observable[T]

Debounces by dropping all values that are followed by newer values before the timeout value expires.

Debounces by dropping all values that are followed by newer values before the timeout value expires. The timer resets on each onNext call.

NOTE: If events keep firing faster than the timeout then no data will be emitted.

Information on debounce vs throttle: - http://drupalmotion.com/article/debounce-and-throttle-visual-explanation - http://unscriptable.com/2009/03/20/debouncing-javascript-methods/ - http://www.illyriad.co.uk/blog/index.php/2011/09/javascript-dont-spam-your-server-debounce-and-throttle/

timeout: The time each value has to be 'the most recent' of the Observable to ensure that it's not dropped.
returns: An Observable which filters out values which are too quickly followed up with newer values.

Definition Classes: Observable
See also: Observable.throttleWithTimeout

def debounceTime(timeout: FiniteDuration): Observable[T]

Debounces by dropping all values that are followed by newer values before the timeout value expires.

Debounces by dropping all values that are followed by newer values before the timeout value expires. The timer resets on each onNext call.

NOTE: If events keep firing faster than the timeout then no data will be emitted.

Information on debounce vs throttle: - http://drupalmotion.com/article/debounce-and-throttle-visual-explanation - http://unscriptable.com/2009/03/20/debouncing-javascript-methods/ - http://www.illyriad.co.uk/blog/index.php/2011/09/javascript-dont-spam-your-server-debounce-and-throttle/

timeout: The time each value has to be 'the most recent' of the Observable to ensure that it's not dropped.
returns: An Observable which filters out values which are too quickly followed up with newer values.

Definition Classes: Observable
See also: Observable.throttleWithTimeout

def defaultIfEmpty[R](defaultValue: ⇒ R): Observable[R]

Returns an Observable that emits the items emitted by the source Observable or a specified default item if the source Observable is empty.

defaultValue: the item to emit if the source Observable emits no items. This is a by-name parameter, so it is only evaluated if the source Observable doesn't emit anything.
returns: an Observable that emits either the specified default item if the source Observable emits no items, or the items emitted by the source Observable

Definition Classes: Observable

def delay(delay: Int): Observable[T]

Returns an Observable that emits the items emitted by the source Observable shifted forward in time by a specified delay.

Returns an Observable that emits the items emitted by the source Observable shifted forward in time by a specified delay. Error notifications from the source Observable are not delayed.

delay: the delay to shift the source by
returns: the source Observable shifted in time by the specified delay

Definition Classes: Observable

def delay(delay: FiniteDuration): Observable[T]

Returns an Observable that emits the items emitted by the source Observable shifted forward in time by a specified delay.

Returns an Observable that emits the items emitted by the source Observable shifted forward in time by a specified delay. Error notifications from the source Observable are not delayed.

delay: the delay to shift the source by
returns: the source Observable shifted in time by the specified delay

Definition Classes: Observable

def delayWhen[U, I](delayDurationSelector: (T) ⇒ Observable[U]): Observable[T]

Returns an Observable that delays the emissions of the source Observable via another Observable on a per-item basis.

Note: the resulting Observable will immediately propagate any onError notification from the source Observable.

delayDurationSelector: a function that returns an Observable for each item emitted by the source Observable, which is then used to delay the emission of that item by the resulting Observable until the Observable returned from itemDelay emits an item
returns: an Observable that delays the emissions of the source Observable via another Observable on a per-item basis

Definition Classes: Observable

def delayWhen[U, I](delayDurationSelector: (T) ⇒ Observable[U], subscriptionDelay: Observable[I]): Observable[T]

Returns an Observable that delays the emissions of the source Observable via another Observable on a per-item basis.

Note: the resulting Observable will immediately propagate any onError notification from the source Observable.

delayDurationSelector: a function that returns an Observable for each item emitted by the source Observable, which is then used to delay the emission of that item by the resulting Observable until the Observable returned from itemDelay emits an item
subscriptionDelay: a function that returns an Observable that triggers the subscription to the source Observable once it emits any item
returns: an Observable that delays the emissions of the source Observable via another Observable on a per-item basis

Definition Classes: Observable

def dematerialize[U]: Observable[U]

[use case] Returns an Observable that reverses the effect of rxscalajs.Observable.materialize by transforming the rxscalajs.Notification objects emitted by the source Observable into the items or notifications they represent.

[use case]

Returns an Observable that reverses the effect of rxscalajs.Observable.materialize by transforming the rxscalajs.Notification objects emitted by the source Observable into the items or notifications they represent.

This operation is only available if this is of type Observable[Notification[U]] for some U, otherwise you will get a compilation error.

returns: an Observable that emits the items and notifications embedded in the rxscalajs.Notification objects emitted by the source Observable

Definition Classes: Observable

def distinct[T2]: Observable[T]

Returns an Observable that forwards all items emitted from the source Observable that are distinct according to a key selector function.

returns: an Observable of distinct items

Definition Classes: Observable

def distinct[K](keySelector: (T) ⇒ K): Observable[T]

Returns an Observable that forwards all items emitted from the source Observable that are distinct according to a key selector function.

returns: an Observable of distinct items

Definition Classes: Observable

def distinct[T2](flushes: Observable[T2]): Observable[T]

Returns an Observable that forwards all items emitted from the source Observable that are distinct according to a key selector function.

flushes: Observable for flushing the internal HashSet of the operator.
returns: an Observable of distinct items

Definition Classes: Observable

def distinct[K, T2](keySelector: (T) ⇒ K, flushes: Observable[T2]): Observable[T]

Returns an Observable that forwards all items emitted from the source Observable that are distinct according to a key selector function.

keySelector: function to select which value you want to check as distinct.
flushes: Observable for flushing the internal HashSet of the operator.
returns: an Observable of distinct items

Definition Classes: Observable

def distinctUntilChanged: Observable[T]

Returns an Observable that forwards all items emitted from the source Observable that are sequentially distinct according to a key selector function.

returns: an Observable of sequentially distinct items

Definition Classes: Observable

def distinctUntilChanged(compare: (T, T) ⇒ Boolean): Observable[T]

Returns an Observable that forwards all items emitted from the source Observable that are sequentially distinct according to a key selector function.

compare: a function that compares the two items
returns: an Observable of sequentially distinct items

Definition Classes: Observable

def distinctUntilChanged[K](compare: (K, K) ⇒ Boolean, keySelector: (T) ⇒ K): Observable[T]

Returns an Observable that forwards all items emitted from the source Observable that are sequentially distinct according to a key selector function.

compare: a function that compares the two items
keySelector: a function that projects an emitted item to a key value which is used for deciding whether an item is sequentially distinct from another one or not
returns: an Observable of sequentially distinct items

Definition Classes: Observable

def drop(total: Int): Observable[T]

Returns an Observable that skips the first num items emitted by the source Observable and emits the remainder.

total: the number of items to skip
returns: an Observable that is identical to the source Observable except that it does not emit the first num items that the source emits

Definition Classes: Observable

def dropUntil[U](notifier: Observable[U]): Observable[T]

Returns an Observable that skips items emitted by the source Observable until a second Observable emits an item.

notifier: the second Observable that has to emit an item before the source Observable's elements begin to be mirrored by the resulting Observable
returns: an Observable that skips items from the source Observable until the second Observable emits an item, then emits the remaining items

Definition Classes: Observable
See also: MSDN: Observable.SkipUntil
RxJava Wiki: skipUntil()

def dropWhile(predicate: (T, Int) ⇒ Boolean): Observable[T]

Returns an Observable that bypasses all items from the source Observable as long as the specified condition holds true.

Returns an Observable that bypasses all items from the source Observable as long as the specified condition holds true. Emits all further source items as soon as the condition becomes false.

predicate: A function to test each item emitted from the source Observable for a condition.
returns: an Observable that emits all items from the source Observable as soon as the condition becomes false.

Definition Classes: Observable

final def eq(arg0: AnyRef): Boolean

Definition Classes: AnyRef

def equals(arg0: Any): Boolean

Definition Classes: AnyRef → Any

def error(err: Any): Unit

Notifies the Observer that the rxscalajs.Observable has experienced an error condition.

If the rxscalajs.Observable calls this method, it will not thereafter call next or completed.

Definition Classes: Subject → Observer

def every(predicate: (T, Int) ⇒ Boolean): Observable[Boolean]

Determines whether all elements of an observable sequence satisfy a condition.

predicate: A function to test each element for a condition.
returns: An observable sequence containing a single element determining whether all elements in the source sequence pass the test in the specified predicate.

Definition Classes: Observable

def exhaust[U](implicit evidence: <:<[Observable[T], Observable[Observable[U]]]): Observable[U]

Projects each source value to an Observable which is merged in the output Observable only if the previous projected Observable has completed.

Projects each source value to an Observable which is merged in the output Observable only if the previous projected Observable has completed. Maps each value to an Observable, then flattens all of these inner Observables using exhaust.

returns: Returns an Observable that takes a source of Observables and propagates the first observable exclusively until it completes before subscribing to the next.

Definition Classes: Observable

def exhaustMap[R](project: (T, Int) ⇒ Observable[R]): Observable[R]

Converts a higher-order Observable into a first-order Observable by dropping inner Observables while the previous inner Observable has not yet completed.

Converts a higher-order Observable into a first-order Observable by dropping inner Observables while the previous inner Observable has not yet completed. Flattens an Observable-of-Observables by dropping the next inner Observables while the current inner is still executing.

project: A function that, when applied to an item emitted by the source Observable, returns an Observable.
returns: An Observable containing projected Observables of each item of the source, ignoring projected Observables that start before their preceding Observable has completed.

Definition Classes: Observable

def exhaustMap[I, R](project: (T, Int) ⇒ Observable[R], resultSelector: (T, I, Int, Int) ⇒ R): Observable[R]

Converts a higher-order Observable into a first-order Observable by dropping inner Observables while the previous inner Observable has not yet completed.

Converts a higher-order Observable into a first-order Observable by dropping inner Observables while the previous inner Observable has not yet completed. Flattens an Observable-of-Observables by dropping the next inner Observables while the current inner is still executing.

project: A function that, when applied to an item emitted by the source Observable, returns an Observable.
resultSelector: A function to produce the value on the output Observable based on the values and the indices of the source (outer) emission and the inner Observable emission. The arguments passed to this function are: outerValue: the value that came from the source innerValue: the value that came from the projected Observable outerIndex: the "index" of the value that came from the source innerIndex: the "index" of the value from the projected Observable
returns: An Observable containing projected Observables of each item of the source, ignoring projected Observables that start before their preceding Observable has completed.

Definition Classes: Observable

def expand[R](project: (T, Int) ⇒ Observable[R]): Observable[R]

Returns an Observable where for each item in the source Observable, the supplied function is applied to each item, resulting in a new value to then be applied again with the function.

project: the function for projecting the next emitted item of the Observable.
returns: An observable sequence containing a single element determining whether all elements in the source sequence pass the test in the specified predicate.

Definition Classes: Observable

def expand[R](project: (T, Int) ⇒ Observable[R], scheduler: Scheduler, concurrent: Int = Int.MaxValue): Observable[R]

Returns an Observable where for each item in the source Observable, the supplied function is applied to each item, resulting in a new value to then be applied again with the function.

project: the function for projecting the next emitted item of the Observable.
scheduler: The Scheduler to use for managing the expansions.
concurrent: the max number of observables that can be created concurrently. defaults to infinity.
returns: An observable sequence containing a single element determining whether all elements in the source sequence pass the test in the specified predicate.

Definition Classes: Observable

def filter[T2](predicate: (T) ⇒ Boolean): Observable[T]

Returns an Observable which only emits those items for which a given predicate holds.

predicate: a function that evaluates the items emitted by the source Observable, returning true if they pass the filter
returns: an Observable that emits only those items in the original Observable that the filter evaluates as true

Definition Classes: Observable

def filter[T2](predicate: (T, Int) ⇒ Boolean): Observable[T]

Returns an Observable which only emits those items for which a given predicate holds.

predicate: a function that evaluates the items emitted by the source Observable, returning true if they pass the filter
returns: an Observable that emits only those items in the original Observable that the filter evaluates as true

Definition Classes: Observable

def finalize(): Unit

Attributes: protected[java.lang]
Definition Classes: AnyRef
Annotations: @throws( classOf[java.lang.Throwable] )

def find[T2](predicate: (T, Int) ⇒ Boolean): Observable[T]

Emits only the first value emitted by the source Observable that meets some condition.

predicate: A function called with each item to test for condition matching.
returns: An Observable of the first item that matches the condition.

Definition Classes: Observable

def findIndex[T2](predicate: (T, Int) ⇒ Boolean): Observable[Int]

Emits only the index of the first value emitted by the source Observable that meets some condition.

predicate: A function called with each item to test for condition matching.
returns: An Observable of the index of the first item that matches the condition.

Definition Classes: Observable

def first: Observable[T]

Returns an Observable that emits only the very first item emitted by the source Observable, or raises an NoSuchElementException if the source Observable is empty.

returns: an Observable that emits only the very first item emitted by the source Observable, or raises an NoSuchElementException if the source Observable is empty

Definition Classes: Observable
See also: "MSDN: Observable.firstAsync()"
RxJava Wiki: first()

def firstOrElse[R >: T](default: ⇒ R): Observable[R]

Returns an Observable that emits only the very first item emitted by the source Observable, or a default value if the source Observable is empty.

default: The default value to emit if the source Observable doesn't emit anything. This is a by-name parameter, so it is only evaluated if the source Observable doesn't emit anything.
returns: an Observable that emits only the very first item from the source, or a default value if the source Observable completes without emitting any item.

Definition Classes: Observable

def flatMap[R](project: (T) ⇒ Observable[R]): Observable[R]

Returns an Observable that emits items based on applying a function that you supply to each item emitted by the source Observable , where that function returns an Observable , and then merging those resulting Observables and emitting the results of this merger, while limiting the maximum number of concurrent subscriptions to these Observables.

project: a function that, when applied to an item emitted by the source Observable, returns an Observable
returns: an Observable that emits the result of applying the transformation function to each item emitted by the source Observable and merging the results of the Observables obtained from this transformation

Definition Classes: Observable

def flatten[U](implicit evidence: <:<[Observable[T], Observable[Observable[U]]]): Observable[U]

Flattens the sequence of Observables emitted by this into one Observable, without any transformation.

You can combine the items emitted by multiple Observables so that they act like a single Observable by using this method.

This operation is only available if this is of type Observable[Observable[U]] for some U, otherwise you'll get a compilation error.

returns: an Observable that emits items that are the result of flattening the items emitted by the Observables emitted by this

Definition Classes: Observable

def foldLeft[R](seed: R)(accumulator: (R, T) ⇒ R): Observable[R]

Returns an Observable that applies a function of your choosing to the first item emitted by a source Observable, then feeds the result of that function along with the second item emitted by an Observable into the same function, and so on until all items have been emitted by the source Observable, emitting the final result from the final call to your function as its sole item.

This technique, which is called "fold" or "reduce" here, is sometimes called "aggregate," "accumulate," "compress," or "inject" in other programming contexts. Groovy, for instance, has an inject method that does a similar operation on lists.

seed: the initial (seed) accumulator value
accumulator: an accumulator function to be invoked on each item emitted by the source Observable, the result of which will be used in the next accumulator call
returns: an Observable that emits a single item that is the result of accumulating the output from the items emitted by the source Observable

Definition Classes: Observable

final def getClass(): Class[_]

Definition Classes: AnyRef → Any

def groupBy[K](keySelector: (T) ⇒ K): Observable[(K, Observable[T])]

Groups the items emitted by an Observable according to a specified criterion, and emits these grouped items as (key, observable) pairs.

Note: A (key, observable) will cache the items it is to emit until such time as it is subscribed to. For this reason, in order to avoid memory leaks, you should not simply ignore those (key, observable) pairs that do not concern you. Instead, you can signal to them that they may discard their buffers by applying an operator like take(0) to them.

K: the key type
keySelector: a function that extracts the key for each item
returns: an Observable that emits (key, observable) pairs, each of which corresponds to a unique key value and each of which emits those items from the source Observable that share that key value

Definition Classes: Observable
See also: MSDN: Observable.GroupBy
RxJava wiki: groupBy

def groupBy[K, V](keySelector: (T) ⇒ K, valueSelector: (T) ⇒ V): Observable[(K, Observable[V])]

Groups the items emitted by an Observable according to a specified criterion, and emits these grouped items as (key, observable) pairs.

Note: A (key, observable) will cache the items it is to emit until such time as it is subscribed to. For this reason, in order to avoid memory leaks, you should not simply ignore those (key, observable) pairs that do not concern you. Instead, you can signal to them that they may discard their buffers by applying an operator like take(0) to them.

K: the key type
V: the value type
keySelector: a function that extracts the key for each item
valueSelector: a function that extracts the return element for each item
returns: an Observable that emits (key, observable) pairs, each of which corresponds to a unique key value and each of which emits those items from the source Observable that share that key value

Definition Classes: Observable
See also: MSDN: Observable.GroupBy
RxJava wiki: groupBy

def hashCode(): Int

Definition Classes: AnyRef → Any

def ignoreElements: Observable[T]

Ignores all items emitted by the source Observable and only passes calls of complete or error.

returns: an empty Observable that only calls complete or error, based on which one is called by the source Observable.

Definition Classes: Observable

val inner: ObservableFacade[T]

Definition Classes: Observable

def isEmpty: Observable[Boolean]

Tests whether this Observable emits no elements.

returns: an Observable emitting one single Boolean, which is true if this Observable emits no elements, and false otherwise.

Definition Classes: Observable

final def isInstanceOf[T0]: Boolean

Definition Classes: Any

def last: Observable[T]

Returns an Observable that emits the last item emitted by the source Observable or notifies observers of an NoSuchElementException if the source Observable is empty.

returns: an Observable that emits the last item from the source Observable or notifies observers of an error

Definition Classes: Observable
See also: "MSDN: Observable.lastAsync()"
RxJava Wiki: last()

def lastOrElse[R >: T](default: ⇒ R): Observable[R]

Returns an Observable that emits only the last item emitted by the source Observable, or a default item if the source Observable completes without emitting any items.

default: the default item to emit if the source Observable is empty. This is a by-name parameter, so it is only evaluated if the source Observable doesn't emit anything.
returns: an Observable that emits only the last item emitted by the source Observable, or a default item if the source Observable is empty

Definition Classes: Observable

def map[R](project: (T) ⇒ R): Observable[R]

Returns an Observable that applies the given function to each item emitted by an Observable and emits the result.

project: a function to apply to each item emitted by the Observable
returns: an Observable that emits the items from the source Observable, transformed by the given function

Definition Classes: Observable

def mapTo[R](value: R): Observable[R]

Returns an Observable that maps each element to a specific value.

value: the value to map to.
returns: an Observable that emits the items from the source Observable, transformed by the given function

Definition Classes: Observable

def mapWithIndex[R](project: (T, Int) ⇒ R): Observable[R]

Returns an Observable that applies the given function to each item emitted by an Observable and emits the result.

project: a function to apply to each item emitted by the Observable
returns: an Observable that emits the items from the source Observable, transformed by the given function

Definition Classes: Observable

def materialize: Observable[Notification[_ <: T]]

Turns all of the notifications from a source Observable into onNext emissions, and marks them with their original notification types within rxscalajs.Notification objects.

returns: an Observable whose items are the result of materializing the items and notifications of the source Observable

Definition Classes: Observable

def merge[R >: T](first: Observable[R], second: Observable[R], third: Observable[R]): Observable[R]

Flattens four Observables into one Observable, without any transformation.

You can combine items emitted by four Observables so that they act like a single Observable by using the merge method.

first: an Observable to be merged
second: an Observable to be merged
third: an Observable to be merged
returns: an Observable that emits items from all Observables until one emits onError or all Observables emit onCompleted.

Definition Classes: Observable

def merge[R >: T](first: Observable[R], second: Observable[R]): Observable[R]

Flattens three Observables into one Observable, without any transformation.

You can combine items emitted by three Observables so that they act like a single Observable by using the merge method.

first: an Observable to be merged
second: an Observable to be merged
returns: an Observable that emits items from all Observables until one emits onError or all Observables emit onCompleted.

Definition Classes: Observable

def merge[R >: T](that: Observable[R]): Observable[R]

Flattens two Observables into one Observable, without any transformation.

You can combine items emitted by two Observables so that they act like a single Observable by using the merge method.

that: an Observable to be merged
returns: an Observable that emits items from this and that until this or that emits onError or both Observables emit onCompleted.

Definition Classes: Observable

def merge[R >: T](that: Observable[R], concurrent: Int = Int.MaxValue, scheduler: Scheduler): Observable[R]

Flattens two Observables into one Observable, without any transformation.

You can combine items emitted by two Observables so that they act like a single Observable by using the merge method.

that: an Observable to be merged
concurrent: the maximum number of Observables that may be subscribed to concurrently
returns: an Observable that emits items from this and that until this or that emits onError or both Observables emit onCompleted.

Definition Classes: Observable

def mergeAll[U](concurrent: Int = Int.MaxValue)(implicit evidence: <:<[Observable[T], Observable[Observable[U]]]): Observable[U]

Flattens the sequence of Observables emitted by this into one Observable, without any transformation.

You can combine the items emitted by multiple Observables so that they act like a single Observable by using this method.

This operation is only available if this is of type Observable[Observable[U]] for some U, otherwise you'll get a compilation error.

concurrent: the maximum number of Observables that may be subscribed to concurrently
returns: an Observable that emits items that are the result of flattening the items emitted by the Observables emitted by this

Definition Classes: Observable

def mergeMap[R](project: (T) ⇒ Observable[R]): Observable[R]

Returns an Observable that emits items based on applying a function that you supply to each item emitted by the source Observable , where that function returns an Observable , and then merging those resulting Observables and emitting the results of this merger, while limiting the maximum number of concurrent subscriptions to these Observables.

project: a function that, when applied to an item emitted by the source Observable, returns an Observable
returns: an Observable that emits the result of applying the transformation function to each item emitted by the source Observable and merging the results of the Observables obtained from this transformation

Definition Classes: Observable

def mergeMapTo[R](innerObservable: Observable[R]): Observable[R]

Definition Classes: Observable

def mergeMapTo[I, R](innerObservable: Observable[I], resultSelector: (T, I, Int, Int) ⇒ R, concurrent: Int = Int.MaxValue): Observable[R]

Definition Classes: Observable

def multicast(subjectOrSubjectFactory: SubjectFacade[_ >: T]): ConnectableObservable[T]

Definition Classes: Observable

final def ne(arg0: AnyRef): Boolean

Definition Classes: AnyRef

def next(value: T): Unit

Provides the Observer with new data.

The rxscalajs.Observable calls this closure 0 or more times.

The rxscalajs.Observable will not call this method again after it calls either completed or error.

Definition Classes: Subject → Observer

final def notify(): Unit

Definition Classes: AnyRef

final def notifyAll(): Unit

Definition Classes: AnyRef

def onErrorResumeNext[U >: T](resumeFunction: (Any) ⇒ Observable[U]): Observable[U]

Instruct an Observable to pass control to another Observable rather than invoking onError if it encounters an error.

By default, when an Observable encounters an error that prevents it from emitting the expected item to its Observer, the Observable invokes its Observer's onError method, and then quits without invoking any more of its Observer's methods. The onErrorResumeNext method changes this behavior. If you pass a function that returns an Observable (resumeFunction) to onErrorResumeNext, if the original Observable encounters an error, instead of invoking its Observer's onError method, it will instead relinquish control to the Observable returned from resumeFunction, which will invoke the Observer's onNext method if it is able to do so. In such a case, because no Observable necessarily invokes onError, the Observer may never know that an error happened.

You can use this to prevent errors from propagating or to supply fallback data should errors be encountered.

resumeFunction: a function that returns an Observable that will take over if the source Observable encounters an error
returns: the original Observable, with appropriately modified behavior

Definition Classes: Observable

def onErrorReturn[U >: T](resumeFunction: (Any) ⇒ U): Observable[U]

Instruct an Observable to emit an item (returned by a specified function) rather than invoking onError if it encounters an error.

By default, when an Observable encounters an error that prevents it from emitting the expected item to its Observer, the Observable invokes its Observer's onError method, and then quits without invoking any more of its Observer's methods. The onErrorReturn method changes this behavior. If you pass a function (resumeFunction) to an Observable's onErrorReturn method, if the original Observable encounters an error, instead of invoking its Observer's onError method, it will instead pass the return value of resumeFunction to the Observer's onNext method.

You can use this to prevent errors from propagating or to supply fallback data should errors be encountered.

resumeFunction: a function that returns an item that the new Observable will emit if the source Observable encounters an error
returns: the original Observable with appropriately modified behavior

Definition Classes: Observable

def orElse[U >: T](default: ⇒ U): Observable[U]

Returns an Observable that emits the items emitted by the source Observable or a specified default item if the source Observable is empty.

default: the item to emit if the source Observable emits no items. This is a by-name parameter, so it is only evaluated if the source Observable doesn't emit anything.
returns: an Observable that emits either the specified default item if the source Observable emits no items, or the items emitted by the source Observable

Definition Classes: Observable

def pairwise: Observable[(T, T)]

Groups pairs of consecutive emissions together and emits them as a tuple of two values.

returns: an Observable of pairs (as tuples) of consecutive values from the source Observable.

Definition Classes: Observable

def partition[T2](predicate: (T) ⇒ Boolean): (Observable[T], Observable[T])

Splits the source Observable into two, one with values that satisfy a predicate, and another with values that don't satisfy the predicate.

Splits the source Observable into two, one with values that satisfy a predicate, and another with values that don't satisfy the predicate. It's like filter, but returns two Observables: one like the output of filter, and the other with values that did not pass the condition.

predicate: A function that evaluates each value emitted by the source Observable. If it returns true, the value is emitted on the first Observable in the returned array, if false the value is emitted on the second Observable in the tuple.
returns: an Observable that emits a single item that is the result of accumulating the output from the items emitted by the source Observable

Definition Classes: Observable

def publish: ConnectableObservable[T]

Returns a ConnectableObservable, which waits until the connect function is called before it begins emitting items from this [Observable to those Observers that have subscribed to it.

returns: an ConnectableObservable

Definition Classes: Observable

def publishLast: ConnectableObservable[T]

Definition Classes: Observable

def publishReplay(bufferSize: Int = Int.MaxValue, windowTime: FiniteDuration = Int.MaxValue.millis): ConnectableObservable[T]

Definition Classes: Observable

def race(observables: Observable[_ >: T]*): Observable[T]

Returns an Observable that mirrors the first source Observable to emit an item from the combination of this Observable and supplied Observables

observables: sources used to race for which Observable emits first.
returns: an Observable that mirrors the output of the first Observable to emit an item.

Definition Classes: Observable

def reduce[U >: T](accumulator: (U, U) ⇒ U): Observable[U]

Returns an Observable that applies a function of your choosing to the first item emitted by a source Observable, then feeds the result of that function along with the second item emitted by the source Observable into the same function, and so on until all items have been emitted by the source Observable, and emits the final result from the final call to your function as its sole item.

This technique, which is called "reduce" or "aggregate" here, is sometimes called "fold," "accumulate," "compress," or "inject" in other programming contexts. Groovy, for instance, has an inject method that does a similar operation on lists.

accumulator: An accumulator function to be invoked on each item emitted by the source Observable, whose result will be used in the next accumulator call
returns: an Observable that emits a single item that is the result of accumulating the output from the source Observable

Definition Classes: Observable

def repeat(count: Int = 1): Observable[T]

Returns an Observable that repeats the sequence of items emitted by the source Observable at most count times.

count: the number of times the source Observable items are repeated, a count of 0 will yield an empty sequence
returns: an Observable that repeats the sequence of items emitted by the source Observable at most count times

Definition Classes: Observable
See also: MSDN: Observable.Repeat
RxJava Wiki: repeat()

def retry(count: Int = 1): Observable[T]

Retry subscription to origin Observable upto given retry count.

If Observer.onError is invoked the source Observable will be re-subscribed to as many times as defined by retryCount.

Any Observer.onNext calls received on each attempt will be emitted and concatenated together.

For example, if an Observable fails on first time but emits [1, 2] then succeeds the second time and emits [1, 2, 3, 4, 5] then the complete output would be [1, 2, 1, 2, 3, 4, 5, onCompleted].

count: Number of retry attempts before failing.
returns: Observable with retry logic.

Definition Classes: Observable

def retryWhen[U, S](notifier: (Observable[U]) ⇒ Observable[S]): Observable[T]

Returns an Observable that emits the same values as the source observable with the exception of an onError.

Returns an Observable that emits the same values as the source observable with the exception of an onError. An onError notification from the source will result in the emission of a Throwable to the Observable provided as an argument to the notificationHandler function. If the Observable returned onCompletes or onErrors then retry will call onCompleted or onError on the child subscription. Otherwise, this Observable will resubscribe to the source Observable.

Example:

This retries 3 times, each time incrementing the number of seconds it waits.

notifier: receives an Observable of a Throwable with which a user can complete or error, aborting the retry
returns: the source Observable modified with retry logic

Definition Classes: Observable; `retryWhen` operates by default on the `trampoline` [[Scheduler]].
Since: 0.20
See also: RxScalaDemo.retryWhenDifferentExceptionsExample for a more intricate example
RxJava Wiki: retryWhen()

def sample[I](sampler: Observable[I]): Observable[T]

Return an Observable that emits the results of sampling the items emitted by the source Observable whenever the specified sampler Observable emits an item or completes.

sampler: the Observable to use for sampling the source Observable
returns: an Observable that emits the results of sampling the items emitted by this Observable whenever the sampler Observable emits an item or completes

Definition Classes: Observable

def sampleTime(delay: Int): Observable[T]

Returns an Observable that emits the results of sampling the items emitted by the source Observable at a specified time interval.

delay: the sampling rate
returns: an Observable that emits the results of sampling the items emitted by the source Observable at the specified time interval

Definition Classes: Observable

def sampleTime(delay: FiniteDuration): Observable[T]

Returns an Observable that emits the results of sampling the items emitted by the source Observable at a specified time interval.

delay: the sampling rate
returns: an Observable that emits the results of sampling the items emitted by the source Observable at the specified time interval

Definition Classes: Observable

def sampleTime(delay: FiniteDuration, scheduler: Scheduler): Observable[T]

Returns an Observable that emits the results of sampling the items emitted by the source Observable at a specified time interval.

delay: the sampling rate
scheduler: the rxscalajs.Scheduler to use when sampling
returns: an Observable that emits the results of sampling the items emitted by the source Observable at the specified time interval

Definition Classes: Observable

def scan[U >: T](accumulator: (U, U) ⇒ U): Observable[U]

Returns an Observable that applies a function of your choosing to the first item emitted by a source Observable, then feeds the result of that function along with the second item emitted by an Observable into the same function, and so on until all items have been emitted by the source Observable, emitting the result of each of these iterations.

This sort of function is sometimes called an accumulator.

Note that when you pass a seed to scan() the resulting Observable will emit that seed as its first emitted item.

accumulator: an accumulator function to be invoked on each item emitted by the source Observable, whose result will be emitted to rxscalajs.subscription.ObserverFacades via onNext and used in the next accumulator call.
returns: an Observable that emits the results of each call to the accumulator function

Definition Classes: Observable

def scan[R](seed: R)(accumulator: (R, T) ⇒ R): Observable[R]

Returns an Observable that applies a function of your choosing to the first item emitted by a source Observable, then feeds the result of that function along with the second item emitted by an Observable into the same function, and so on until all items have been emitted by the source Observable, emitting the result of each of these iterations.

This sort of function is sometimes called an accumulator.

Note that when you pass a seed to scan() the resulting Observable will emit that seed as its first emitted item.

seed: the initial (seed) accumulator value
accumulator: an accumulator function to be invoked on each item emitted by the source Observable, whose result will be emitted to rxscalajs.subscription.ObserverFacades via onNext and used in the next accumulator call.
returns: an Observable that emits the results of each call to the accumulator function

Definition Classes: Observable

def scanM[M[_], R](seed: R)(accumulator: (R, T) ⇒ M[R])(implicit arg0: Monad[M]): Observable[M[R]]

Similar to scan, but uses monadic accumulation instead.

seed: the initial (seed) accumulator value
accumulator: an accumulator function to be invoked on each item emitted by the source
returns: an Observable that emits the monadic result of each call to the accumulator function

Definition Classes: Observable

def scanMap[R](f: (T) ⇒ R)(implicit arg0: Monoid[R]): Observable[R]

Similar to scan, but uses a monoid for accumulation instead.

f: a function to map this Observable to a monoid
returns: an Observable that emits the result of the accumulation

Definition Classes: Observable

def share: Observable[T]

Returns a new Observable that multicasts (shares) the original Observable.

Returns a new Observable that multicasts (shares) the original Observable. As long a there is more than 1 rxscalajs.subscription.Subscriber, this Observable will be subscribed and emitting data. When all subscribers have unsubscribed it will unsubscribe from the source Observable.

This is an alias for publish().refCount()

returns: a Observable that upon connection causes the source Observable to emit items to its rxscalajs.subscription.Subscribers

Definition Classes: Observable
Since: 0.19

def single: Observable[T]

If the source Observable completes after emitting a single item, return an Observable that emits that item.

If the source Observable completes after emitting a single item, return an Observable that emits that item. If the source Observable emits more than one item or no items, notify of an IllegalArgumentException or NoSuchElementException respectively.

returns: an Observable that emits the single item emitted by the source Observable

Definition Classes: Observable
See also: "MSDN: Observable.singleAsync()"
RxJava Wiki: single()

def single(predicate: (T, Int, Observable[T]) ⇒ Boolean): Observable[T]

If the source Observable completes after emitting a single item, return an Observable that emits that item.

If the source Observable completes after emitting a single item, return an Observable that emits that item. If the source Observable emits more than one item or no items, notify of an IllegalArgumentException or NoSuchElementException respectively.

returns: an Observable that emits the single item emitted by the source Observable

Definition Classes: Observable
See also: "MSDN: Observable.singleAsync()"
RxJava Wiki: single()

def skip(total: Int): Observable[T]

Returns an Observable that skips the first num items emitted by the source Observable and emits the remainder.

total: the number of items to skip
returns: an Observable that is identical to the source Observable except that it does not emit the first num items that the source emits

Definition Classes: Observable

def skipUntil[U](notifier: Observable[U]): Observable[T]

Returns an Observable that skips items emitted by the source Observable until a second Observable emits an item.

notifier: the second Observable that has to emit an item before the source Observable's elements begin to be mirrored by the resulting Observable
returns: an Observable that skips items from the source Observable until the second Observable emits an item, then emits the remaining items

Definition Classes: Observable
See also: MSDN: Observable.SkipUntil
RxJava Wiki: skipUntil()

def skipWhile(predicate: (T, Int) ⇒ Boolean): Observable[T]

Returns an Observable that bypasses all items from the source Observable as long as the specified condition holds true.

Returns an Observable that bypasses all items from the source Observable as long as the specified condition holds true. Emits all further source items as soon as the condition becomes false.

predicate: A function to test each item emitted from the source Observable for a condition.
returns: an Observable that emits all items from the source Observable as soon as the condition becomes false.

Definition Classes: Observable

def sliding(count: Int, skip: Int): Observable[Observable[T]]

Creates an Observable which produces windows of collected values.

Creates an Observable which produces windows of collected values. This Observable produces windows every skip values, each containing count elements. When the source Observable completes or encounters an error, the current window is emitted and the event is propagated.

count: The maximum size of each window before it should be emitted.
skip: How many produced values need to be skipped before starting a new window. Note that when skip and count are equal that this is the same operation as window(int).
returns: An rxscalajs.Observable which produces windows every skip values containing at most count produced values.

Definition Classes: Observable

def startWith[U >: T](elem: U): Observable[U]

Returns an Observable that emits a specified item before it begins to emit items emitted by the source Observable.

elem: the item to emit
returns: an Observable that emits the specified item before it begins to emit items emitted by the source Observable

Definition Classes: Observable

def startWith[U >: T](elem: U, scheduler: Scheduler): Observable[U]

Returns an Observable that emits a specified item before it begins to emit items emitted by the source Observable.

elem: the item to emit
scheduler: The rxscalajs.Scheduler to use internally to manage the timers which handle timeout for each event.
returns: an Observable that emits the specified item before it begins to emit items emitted by the source Observable

Definition Classes: Observable

def startWithMany[U >: T](elements: U*): Observable[U]

Returns an Observable that emits a specified sequence of items before it begins to emit items emitted by the source Observable.

elements: the items to emit
returns: an Observable that emits the specified item before it begins to emit items emitted by the source Observable

Definition Classes: Observable

def subscribe(observer: Observer[T]): Subscription

Call this method to subscribe an Observer for receiving items and notifications from the Observable.

A typical implementation of subscribe does the following:

It stores a reference to the Observer in a collection object, such as a List[T] object.

It returns a reference to the subscription.Subscription interface. This enables Observers to unsubscribe, that is, to stop receiving items and notifications before the Observable stops sending them, which also invokes the Observer's Observer.complete() method.

An Observable[T] instance is responsible for accepting all subscriptions and notifying all Observers. Unless the documentation for a particular Observable[T] implementation indicates otherwise, Observers should make no assumptions about the order in which multiple Observers will receive their notifications.

returns: a subscription.Subscription reference whose unsubscribe method can be called to stop receiving items before the Observable has finished sending them

Definition Classes: Observable
See also: ReactiveX operators documentation: Subscribe

def subscribe(onNext: (T) ⇒ Unit, error: (Any) ⇒ Unit = e => (), complete: () ⇒ Unit = () => ()): Subscription

Call this method to subscribe an Observer for receiving items and notifications from the Observable.

A typical implementation of subscribe does the following:

It stores a reference to the Observer in a collection object, such as a List[T] object.

It returns a reference to the subscription.Subscription interface. This enables Observers to unsubscribe, that is, to stop receiving items and notifications before the Observable stops sending them, which also invokes the Observer's complete method.

An Observable[T] instance is responsible for accepting all subscriptions and notifying all Observers. Unless the documentation for a particular Observable[T] implementation indicates otherwise, Observers should make no assumptions about the order in which multiple Observers will receive their notifications.

returns: a subscription.Subscription reference whose unsubscribe method can be called to stop receiving items before the Observable has finished sending them

Definition Classes: Observable
See also: ReactiveX operators documentation: Subscribe

def switch[U]: Observable[U]

[use case] Given an Observable that emits Observables, creates a single Observable that emits the items emitted by the most recently published of those Observables.

[use case]

Given an Observable that emits Observables, creates a single Observable that emits the items emitted by the most recently published of those Observables.

This operation is only available if this is of type Observable[Observable[U]] for some U, otherwise you'll get a compilation error.

returns: an Observable that emits only the items emitted by the most recently published Observable

Definition Classes: Observable

def switchMap[R](project: (T) ⇒ Observable[R]): Observable[R]

Returns a new Observable by applying a function that you supply to each item emitted by the source Observable that returns an Observable, and then emitting the items emitted by the most recently emitted of these Observables.

project: a function that, when applied to an item emitted by the source Observable, returns an Observable
returns: an Observable that emits the items emitted by the Observable returned from applying a function to the most recently emitted item emitted by the source Observable

Definition Classes: Observable

def switchMapTo[R](innerObservable: Observable[R]): Observable[R]

Definition Classes: Observable

final def synchronized[T0](arg0: ⇒ T0): T0

Definition Classes: AnyRef

def take(total: Int): Observable[T]

Returns an Observable that emits only the first num items emitted by the source Observable.

This method returns an Observable that will invoke a subscribing rxscalajs.subscription.ObserverFacade's onNext function a maximum of num times before invoking onCompleted.

total: the number of items to take
returns: an Observable that emits only the first num items from the source Observable, or all of the items from the source Observable if that Observable emits fewer than num items

Definition Classes: Observable

def takeLast(total: Int): Observable[T]

Returns an Observable that emits only the last count items emitted by the source Observable.

total: the number of items to emit from the end of the sequence emitted by the source Observable
returns: an Observable that emits only the last count items emitted by the source Observable

Definition Classes: Observable

def takeUntil[U](notifier: Observable[U]): Observable[T]

Returns an Observable that emits the items from the source Observable only until the other Observable emits an item.

notifier: the Observable whose first emitted item will cause takeUntil to stop emitting items from the source Observable
returns: an Observable that emits the items of the source Observable until such time as other emits its first item

Definition Classes: Observable

def takeWhile(predicate: (T, Int) ⇒ Boolean): Observable[T]

Returns an Observable that emits items emitted by the source Observable so long as a specified condition is true.

predicate: a function that evaluates an item emitted by the source Observable and returns a Boolean
returns: an Observable that emits the items from the source Observable so long as each item satisfies the condition defined by predicate

Definition Classes: Observable

def throttle(durationSelector: (T) ⇒ Observable[Int]): Observable[T]

Emits a value from the source Observable, then ignores subsequent source values for a duration determined by another Observable, then repeats this process.

It's like throttleTime, but the silencing duration is determined by a second Observable.

throttle emits the source Observable values on the output Observable when its internal timer is disabled, and ignores source values when the timer is enabled. Initially, the timer is disabled. As soon as the first source value arrives, it is forwarded to the output Observable, and then the timer is enabled by calling the durationSelector function with the source value, which returns the "duration" Observable. When the duration Observable emits a value or completes, the timer is disabled, and this process repeats for the next source value.

durationSelector: A function that receives a value from the source Observable, for computing the silencing duration for each source value, returned as an Observable or a Promise.
returns: An Observable that performs the throttle operation to limit the rate of emissions from the source.

Definition Classes: Observable

def throttleTime(delay: Int): Observable[T]

Debounces by dropping all values that are followed by newer values before the timeout value expires.

Debounces by dropping all values that are followed by newer values before the timeout value expires. The timer resets on each onNext call.

NOTE: If events keep firing faster than the timeout then no data will be emitted.

delay: The time each value has to be 'the most recent' of the rxscalajs.Observable to ensure that it's not dropped.
returns: Observable which performs the throttle operation.

Definition Classes: Observable
See also: Observable.debounce

def throttleTime(delay: FiniteDuration): Observable[T]

Debounces by dropping all values that are followed by newer values before the timeout value expires.

Debounces by dropping all values that are followed by newer values before the timeout value expires. The timer resets on each onNext call.

NOTE: If events keep firing faster than the timeout then no data will be emitted.

delay: The time each value has to be 'the most recent' of the rxscalajs.Observable to ensure that it's not dropped.
returns: Observable which performs the throttle operation.

Definition Classes: Observable
See also: Observable.debounce

def throttleTime(delay: FiniteDuration, scheduler: Scheduler): Observable[T]

Debounces by dropping all values that are followed by newer values before the timeout value expires.

Debounces by dropping all values that are followed by newer values before the timeout value expires. The timer resets on each onNext call.

NOTE: If events keep firing faster than the timeout then no data will be emitted.

delay: The time each value has to be 'the most recent' of the rxscalajs.Observable to ensure that it's not dropped.
scheduler: The rxscalajs.Scheduler to use internally to manage the timers which handle timeout for each event.
returns: Observable which performs the throttle operation.

Definition Classes: Observable
See also: Observable.debounce

def timeInterval: Observable[TimeInterval[T]]

Returns an Observable that emits records of the time interval between consecutive items emitted by the source Observable.

returns: an Observable that emits time interval information items

Definition Classes: Observable

def timeout(due: Int): Observable[T]

Applies a timeout policy for each item emitted by the Observable, using the specified scheduler to run timeout timers.

Applies a timeout policy for each item emitted by the Observable, using the specified scheduler to run timeout timers. If the next item isn't observed within the specified timeout duration starting from its predecessor, a specified fallback Observable sequence produces future items and notifications from that point on.

due: maximum duration between items before a timeout occurs
returns: the source Observable modified so that it will switch to the fallback Observable in case of a timeout

Definition Classes: Observable

def timeout[U](due: Int, scheduler: Scheduler): Observable[T]

Applies a timeout policy for each item emitted by the Observable, using the specified scheduler to run timeout timers.

Applies a timeout policy for each item emitted by the Observable, using the specified scheduler to run timeout timers. If the next item isn't observed within the specified timeout duration starting from its predecessor, a specified fallback Observable sequence produces future items and notifications from that point on.

due: maximum duration between items before a timeout occurs
scheduler: Scheduler to run the timeout timers on
returns: the source Observable modified so that it will switch to the fallback Observable in case of a timeout

Definition Classes: Observable

def timeoutWith[R](due: Int, withObservable: Observable[R]): Observable[R]

Applies a timeout policy for each item emitted by the Observable, using the specified scheduler to run timeout timers.

Applies a timeout policy for each item emitted by the Observable, using the specified scheduler to run timeout timers. If the next item isn't observed within the specified timeout duration starting from its predecessor, a specified fallback Observable produces future items and notifications from that point on.

due: maximum duration between items before a timeout occurs
withObservable: fallback Observable to use in case of a timeout
returns: the source Observable modified to switch to the fallback Observable in case of a timeout

Definition Classes: Observable

def timestamp: Observable[Timestamp[T]]

Wraps each item emitted by a source Observable in a timestamped tuple.

returns: an Observable that emits timestamped items from the source Observable

Definition Classes: Observable

implicit def toFacade[A](observable: Observable[A]): ObservableFacade[A]

Definition Classes: Observable

def toSeq: Observable[Seq[T]]

Returns an Observable that emits a single item, a list composed of all the items emitted by the source Observable.

Normally, an Observable that returns multiple items will do so by invoking its rxscalajs.subscription.ObserverFacade's onNext method for each such item. You can change this behavior, instructing the Observable to compose a list of all of these items and then to invoke the Observer's onNext function once, passing it the entire list, by calling the Observable's toList method prior to calling its Observable.subscribe method.

Be careful not to use this operator on Observables that emit infinite or very large numbers of items, as you do not have the option to unsubscribe.

returns: an Observable that emits a single item: a List containing all of the items emitted by the source Observable.

Definition Classes: Observable

def toString(): String

Definition Classes: AnyRef → Any

def tumbling[I](boundaries: Observable[I]): Observable[Observable[T]]

Creates an Observable which produces windows of collected values.

Creates an Observable which produces windows of collected values. This Observable produces connected non-overlapping windows. The boundary of each window is determined by the items emitted from a specified boundary-governing Observable.

boundaries: an Observable whose emitted items close and open windows. Note: This is a by-name parameter, so it is only evaluated when someone subscribes to the returned Observable.
returns: An Observable which produces connected non-overlapping windows. The boundary of each window is determined by the items emitted from a specified boundary-governing Observable.

Definition Classes: Observable

def unsubscribe(): Unit

Definition Classes: Subject

final def wait(): Unit

Definition Classes: AnyRef
Annotations: @throws( ... )

final def wait(arg0: Long, arg1: Int): Unit

Definition Classes: AnyRef
Annotations: @throws( ... )

final def wait(arg0: Long): Unit

Definition Classes: AnyRef
Annotations: @throws( ... )

def window[I](windowBoundaries: Observable[I]): Observable[Observable[T]]

Creates an Observable which produces windows of collected values.

Creates an Observable which produces windows of collected values. This Observable produces connected non-overlapping windows. The boundary of each window is determined by the items emitted from a specified boundary-governing Observable.

windowBoundaries: an Observable whose emitted items close and open windows. Note: This is a by-name parameter, so it is only evaluated when someone subscribes to the returned Observable.
returns: An Observable which produces connected non-overlapping windows. The boundary of each window is determined by the items emitted from a specified boundary-governing Observable.

Definition Classes: Observable

def windowCount(windowSize: Int, startWindowEvery: Int = 0): Observable[Observable[T]]

Creates an Observable which produces windows of collected values.

Creates an Observable which produces windows of collected values. This Observable produces windows every skip values, each containing count elements. When the source Observable completes or encounters an error, the current window is emitted and the event is propagated.

windowSize: The maximum size of each window before it should be emitted.
startWindowEvery: How many produced values need to be skipped before starting a new window. Note that when skip and count are equal that this is the same operation as window(int).
returns: An rxscalajs.Observable which produces windows every skip values containing at most count produced values.

Definition Classes: Observable

def windowTime(timespan: FiniteDuration): Observable[Observable[T]]

Creates an Observable which produces windows of collected values.

Creates an Observable which produces windows of collected values. This Observable produces connected non-overlapping windows, each of a fixed duration specified by the timespan argument or a maximum size specified by the count argument (which ever is reached first). When the source Observable completes or encounters an error, the current window is emitted and the event is propagated.

timespan: The period of time each window is collecting values before it should be emitted, and replaced with a new window.
returns: An rxscalajs.Observable which produces connected non-overlapping windows which are emitted after a fixed duration or when the window has reached maximum capacity (which ever occurs first).

Definition Classes: Observable

def windowTime(timespan: FiniteDuration, scheduler: Scheduler): Observable[Observable[T]]

Creates an Observable which produces windows of collected values.

Creates an Observable which produces windows of collected values. This Observable produces connected non-overlapping windows, each of a fixed duration specified by the timespan argument or a maximum size specified by the count argument (which ever is reached first). When the source Observable completes or encounters an error, the current window is emitted and the event is propagated.

timespan: The period of time each window is collecting values before it should be emitted, and replaced with a new window.
scheduler: The rxscalajs.Scheduler to use when determining the end and start of a window.
returns: An rxscalajs.Observable which produces connected non-overlapping windows which are emitted after a fixed duration or when the window has reached maximum capacity (which ever occurs first).

Definition Classes: Observable

def windowTime(timespan: Int, timeshift: Int): Observable[Observable[T]]

Creates an Observable which produces windows of collected values.

Creates an Observable which produces windows of collected values. This Observable produces connected non-overlapping windows, each of a fixed duration specified by the timespan argument or a maximum size specified by the count argument (which ever is reached first). When the source Observable completes or encounters an error, the current window is emitted and the event is propagated.

timespan: The period of time each window is collecting values before it should be emitted, and replaced with a new window.
timeshift: the period of time after which a new window will be created
returns: An rxscalajs.Observable which produces connected non-overlapping windows which are emitted after a fixed duration or when the window has reached maximum capacity (which ever occurs first).

Definition Classes: Observable

def windowTime(timespan: FiniteDuration, timeshift: FiniteDuration): Observable[Observable[T]]

Creates an Observable which produces windows of collected values.

Creates an Observable which produces windows of collected values. This Observable produces connected non-overlapping windows, each of a fixed duration specified by the timespan argument or a maximum size specified by the count argument (which ever is reached first). When the source Observable completes or encounters an error, the current window is emitted and the event is propagated.

timespan: The period of time each window is collecting values before it should be emitted, and replaced with a new window.
timeshift: the period of time after which a new window will be created
returns: An rxscalajs.Observable which produces connected non-overlapping windows which are emitted after a fixed duration or when the window has reached maximum capacity (which ever occurs first).

Definition Classes: Observable

def windowTime(timespan: FiniteDuration, timeshift: FiniteDuration, scheduler: Scheduler): Observable[Observable[T]]

Creates an Observable which produces windows of collected values.

Creates an Observable which produces windows of collected values. This Observable produces connected non-overlapping windows, each of a fixed duration specified by the timespan argument or a maximum size specified by the count argument (which ever is reached first). When the source Observable completes or encounters an error, the current window is emitted and the event is propagated.

timespan: The period of time each window is collecting values before it should be emitted, and replaced with a new window.
timeshift: the period of time after which a new window will be created
scheduler: The rxscalajs.Scheduler to use when determining the end and start of a window.
returns: An rxscalajs.Observable which produces connected non-overlapping windows which are emitted after a fixed duration or when the window has reached maximum capacity (which ever occurs first).

Definition Classes: Observable

def windowToggle[U, O](openings: Observable[O])(closingSelector: (O) ⇒ Observable[U]): Observable[Observable[T]]

Creates an Observable which produces windows of collected values.

Creates an Observable which produces windows of collected values. Chunks are created when the specified openings Observable produces an object. That object is used to construct an Observable to emit windows, feeding it into closings function. Windows are emitted when the created Observable produces an object.

openings: The rxscalajs.Observable which when it produces an object, will cause another window to be created.
closingSelector: The function which is used to produce an rxscalajs.Observable for every window created. When this rxscalajs.Observable produces an object, the associated window is emitted.
returns: An rxscalajs.Observable which produces windows which are created and emitted when the specified rxscalajs.Observables publish certain objects.

Definition Classes: Observable

def windowWhen[U](closingSelector: () ⇒ Observable[U]): Observable[Observable[T]]

Creates an Observable which produces windows of collected values.

Creates an Observable which produces windows of collected values. This Observable produces connected non-overlapping windows. The boundary of each window is determined by the items emitted from a specified boundary-governing Observable.

closingSelector: an Observable whose emitted items close and open windows. Note: This is a by-name parameter, so it is only evaluated when someone subscribes to the returned Observable.
returns: An Observable which produces connected non-overlapping windows. The boundary of each window is determined by the items emitted from a specified boundary-governing Observable.

Definition Classes: Observable

def withFilter(p: (T) ⇒ Boolean): WithFilter[T]

Definition Classes: Observable

def withLatestFrom[U](other: Observable[U]): Observable[(T, U)]

Merges the specified Observable into this Observable sequence by using the resultSelector function only when the source Observable (this instance) emits an item.

other: the other Observable
returns: an Observable that merges the specified Observable into this Observable by combining the elements into a tuple only when the source Observable sequence (this instance) emits an item

Definition Classes: Observable
Since: (if this graduates from Experimental/Beta to supported, replace this parenthetical with the release number)
See also: ReactiveX operators documentation: CombineLatest

def withLatestFromWith[U, R](other: Observable[U])(project: (T, U) ⇒ R): Observable[R]

Merges the specified Observable into this Observable sequence by using the resultSelector function only when the source Observable (this instance) emits an item.

other: the other Observable
project: the function to call when this Observable emits an item and the other Observable has already emitted an item, to generate the item to be emitted by the resulting Observable
returns: an Observable that merges the specified Observable into this Observable by using the resultSelector function only when the source Observable sequence (this instance) emits an item

Definition Classes: Observable
Since: (if this graduates from Experimental/Beta to supported, replace this parenthetical with the release number)
See also: ReactiveX operators documentation: CombineLatest

def zip[U](that: Observable[U]): Observable[(T, U)]

Returns an Observable formed from this Observable and another Observable by combining corresponding elements in pairs.

Returns an Observable formed from this Observable and another Observable by combining corresponding elements in pairs. The number of onNext invocations of the resulting Observable[(T, U)] is the minumum of the number of onNext invocations of this and that.

that: the Observable to zip with
returns: an Observable that pairs up values from this and that Observables.

Definition Classes: Observable

def zipWith[U, R](that: Observable[U])(project: (T, U) ⇒ R): Observable[R]

Returns an Observable that emits items that are the result of applying a specified function to pairs of values, one each from the source Observable and a specified Iterable sequence.

Note that the other Iterable is evaluated as items are observed from the source Observable it is not pre-consumed. This allows you to zip infinite streams on either side.

that: the Iterable sequence
project: a function that combines the pairs of items from the Observable and the Iterable to generate the items to be emitted by the resulting Observable
returns: an Observable that pairs up values from the source Observable and the other Iterable sequence and emits the results of selector applied to these pairs

Definition Classes: Observable

def zipWithIndex: Observable[(T, Int)]

Zips this Observable with its indices.

returns: An Observable emitting pairs consisting of all elements of this Observable paired with their index. Indices start at 0.

Definition Classes: Observable

Packages

AsyncSubject

Companion object AsyncSubject

class AsyncSubject[T] extends Subject[T]

Instance Constructors

Type Members

Value Members

def dematerialize[T2]: Observable[T2]

def switch[U](implicit evidence: <:<[Observable[T], Observable[Observable[U]]]): Observable[U]

Inherited from Subject[T]

Inherited from Observer[T]

Inherited from Observable[T]

Inherited from AnyRef

Inherited from Any

Ungrouped

Packages

AsyncSubject 

Companion object AsyncSubject

class AsyncSubject[T] extends Subject[T]

Instance Constructors

Type Members

Value Members

def dematerialize[T2]: Observable[T2]

def switch[U](implicit evidence: <:<[Observable[T], Observable[Observable[U]]]): Observable[U]

Inherited from Subject[T]

Inherited from Observer[T]

Inherited from Observable[T]

Inherited from AnyRef

Inherited from Any

Ungrouped

AsyncSubject